Our Products
Seismic Isolator
MIN Seismic Isolator is designed to protect the superstructure during a seismic event by reducing the ground energy from being transferred to the structure during an earthquake. We have work together with many seismic design engineers in providing our isolators to meet their structure seismic requirement. Our Seismic Isolators are tested to stringent prototype testing before approval is given for production.
Our Products
Laminated Elastomeric Bearing
MIN Laminated Elastomeric Bearing is designed to support the bridge structure and accommodating the lateral movement and rotation cause by changes in temperature, wind and traffic.
Our Products
Mechanical Pot Bearing
MIN Mechanical pot bearing is designed to accommodate a combination of vertical loads, horizontal loads, lateral movements, and rotations. Mechanical Pot Bearings can be design for higher load capacities as compared to Laminated Elastomeric Bearings.
Our Products
Elastomeric Bearing Strip/ Plain Elastomeric Bearing
MIN elastomeric rubber strip or plain pad is an elastomer without internal steel plates. The application is to support the bridge structure and accommodating the lateral movement and rotation. These products are usually use for smaller load support and smaller lateral movements.
Our Products
Multiflex Expansion Joint
MIN Multiflex elastomeric expansion joint satisfied the requirement of bridge deck movement due to temperature changes, shrinkage, creep, and traffic load. We have a complete list of models that will cater for different movement form as small as +/-10mm to a maximum of +/-165mm.
Our Products
Megaflex Asphaltic Plug Expansion Joint
MIN Megaflex Asphaltic Plug Expansion Joint is an asphaltic plug joint which is suitable for small to medium movement use in highway bridges and other selective structure.
-RUBBER-BEARING.jpg)
Our Products
Floating Slab Track (Fst) Rubber Bearing
MIN Floating Slab Track Rubber Bearing is used in supporting the rails’ structure loads and accommodating the movements as well as providing noise insulations.
Our Products
Rubber Waterstop
MIN Rubber Waterstop is specially designed as a system to prevent or retain water in structure for civil engineering applications. Their ranges include dumbell and centerbulb type depending on the applications.
Our Products
Rubber Seal
MIN Rubber Seal ensures watertight closure. The rubber seal are design to be water tight under various hydrostatic pressure.
Our Products
Rubber Dowel Cap
MIN Rubber Dowel Cap is designed as a stiff protection cover between dowel bar and concrete structure to provide sufficient clearance space to accommodate the structure rotational requirement.
Our Products
Leg Mating Units
Leg Mating Units are used in the Float Over Method installation of the oil rig Platform Topside. The topside structure is constructed on shore before being transported to the site with a barge. During the off shore installation, the topside load is slowly transferred to the jacket leg using the leg mating units as a load support.